Posted by BarnyardEngineering on July 18, 2023 at 13:02:50 from (161.69.57.47):
In Reply to: Tire mounting posted by 37 chief on July 18, 2023 at 08:51:50:
I've changed plenty of tires over the years and never thought much of dish soap. Even straight up it seems to soak in or dry way too quick to be any use.
I got a bucket of tire soap several years ago and I'm halfway through it. Keep the lid tightly sealed and it's just as liquid and viable as it ever was.
The lube has been the difference maker in getting some older tires off the rims. Beat and pried for over an hour on a dry tire, added lube, and it slipped right off.
I've even used PB Blaster to dismount a 20" truck tire off a drop center implement rim. Fought with it dry for at least two hours. Add the Blaster, and it came right off. That tire is mounted right back on the rim with a new tube. No sign of deterioration.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
