Posted by GlenIdaho on May 17, 2023 at 15:59:25 from (172.58.44.228):
In Reply to: rust posted by Alan D Harmon on May 17, 2023 at 12:23:14:
Yes, I've used it to seal the inside of the hood of my 850. The idea was to seal it from all future rust. The sheet metal had been sandblasted first and cleaned. Then POR-15 was brushed on with 2 light coats. I surprised how it leveled itself out. I then put a coat of their primer over the POR-15 so that it would accept paint, primed and then PPG's Omni. It is sealed. I know it may have been overkill, but it is sealed up. It's been 10 years now and still looks good with no sign of rust. I also used it on the underside of a mower deck. After cleaning and prep I put on 2 coats. Though it is a hard paint, it didn't hold up, chipped and peeled. I imagine the conditions of mowing were to extreme for it to hold up. was worth a try though.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
