Posted by Jim.ME on May 03, 2023 at 05:29:05 from (67.242.176.154):
In Reply to: Buda Forklift posted by Vicinalvictor on May 02, 2023 at 17:49:51:
I guess you found the FB2024 pictures on the web. The serial number tag on this FB2024 is shown in this picture. Does yours have the tag, or four rivet holes where it was?
FP-2024 could stand for: Forklift (or truck), Propane, 2000 lb. capacity at 24" center.
As far as parts you are likely going to be in the match them up mode. Finding manuals for old forklifts are hit or miss. Liberated manuals is one place some are found. It is a library of military manuals. It will take some searching to see if there is a manual there. Here is a link to the site.
The engine may or may not be a Buda. Searching for a tag or numbers on it may give a clue, casting marks/logos may as well. The distributor brand and numbers, if still on it, may help with matching ignition parts. Plugs you can pull out and match. for the propane system you will likely need to talk to a forklift dealer, or other equipment dealer of equipment using propane systems.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Proflie: Farmall Model C - by Staff. In 1948 the first Farmall Model C tractor rolled out of the factory and into the farmer's field. A follow-on to the Model B, it was slihtly larger in size but kept the same 113 CID engine and 4-speed transmission. Other upgrades included adjustable rear tire spacing (with sliding hubs), a frame design similar t
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
