Posted by redforlife on March 10, 2023 at 08:28:27 from (174.210.161.241):
In Reply to: Tractor prices posted by plowhand on March 10, 2023 at 05:30:51:
I'm not sure what you are referring to? Or making this statement on?
In my area, it depends on what old tractors you are talking about. Stuff from the 60's/early 70's is now of the interest of the retirement age. What dad had, what they started out with. That use to be the way of the stuff in the 40's and 50's, but that stuff is now on the decline because of the new generation now in retirement. Thier not wanting the stuff that Gandpa use to have. That's getting to old, and not really what they remember. It seems as if, as one generation goes to the cemetary, the stuff that was new when they were young, heads to the iron yard right about the same time.
Older bigger tractors with cabs seems to be holding there own too. The ones still feild ready and can be placed into a modern day operation. The ridiculous inflated high price of a new one is probably responsible for this.
As others have said, you can't pick out the high price of a single incident, and apply it to all. There was some talk about a 4440 (I think it was) on here awhile back that brought 70 or 80k. I'm sure that can't be applied to all 4440's. But that tractor would probably fit into the second category that I have already mentioned.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that�s wha
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
