I am guessing this is a John Deere 2010. Giving a full description can help as people here can't see it and the same numbers are used by different manufacturers in some cases. There is also a John Deere specific forum down the index from this one, you might want to use.
You can download a free copy of the Operator's Manuals from the John Deere Ag& Turf Bookstore. Click on this link to go to the site.
On that home page click on the Equipment Publications button. On that search page you can apply filters, if you choose, using the boxes on the left. Enter 2010 in the box to the right of Model Search and then search. That brings up a list of 3 pages of models with 2010 in the name. You will be looking at "Base Units" for tractors. There are model and serial number breaks so you may have to do some looking to match your style (gas, diesel, LP, crawler, row crop, utility, etc.) and serial number range for some. When you find it, you can click the download icon and get a pdf that you can save and print if you want.
Here is a picture of the page showing shift patterns from one manual. As you will note there could be a couple transmission options.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
