Posted by BarnyardEngineering on December 14, 2022 at 05:18:47 from (161.69.123.10):
In Reply to: Electrical posted by rlp in Co. on December 13, 2022 at 14:20:26:
Quote: CVPost-westga (quoted from post at 05:51:23 12/14/22) What he actually had was two separate 120
volts circuits one from each 120 volt buss
and when the neutrals came lose but
remained touching allowed both circuits to
have a combine voltage of 240 volts.
Thank you for the explanation. It was not clear from the original post and when people responded scratching their heads as to how it could happen, they got told to draw a picture.
What I don't understand is how they could have come loose. This house is stationary right? Once the screw is smoked down it should stay smoked down, and the wire is solid copper so once it's bent into place it should stay there.
I keep trying to draw a picture but every time it ends up being a picture of a fire-breathing dinosaur.
- BarnyardENGINEER, not BarnyardElectrician
This post was edited by BarnyardEngineering on 12/14/2022 at 05:19 am.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
