Our H is a putter tractor used mostly to haul wood and run augers in the fall and winter. The othersw 806,856 both don't get the hours nor use they used to. I still work them some for a day at a time. Mostly for haying now and bale with the 806 and mow with the 856 rake with 574 or what ever is available to rake. Haul with what ever is available too. Load with the loader and put in barn with 6036 Skytrac with 4x4 bales in the mow and in the old freestall barn on mow floor there too. 1466 is even getting to small for most work now. It doesn't have the hydraulics for the planter and is almost to small for pulling it. Will pull the field cultivator well and struggles with the mulch finisher. Works it's tail off to pull the chisel plow if I use it. The chisel plow works much better on the 7140 or one of the Steigers. The big Disc is out of the question for anything but the Steigers. Want to get a newer field cultivator and then that will be out of the question for anything but the Steigers also. Would be close to 40 foot. Yes the old Steigers get the same workout each year all spring. Still 70's models tractors.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Memories of an IH Super A When I was ? up to 10, I worked on my Papaw's farm in Greeneville, TN every summer. As I grew older (7), it was the thrill of my day to ride or drive on the tractor. My Papaw had a 1954 IH Super A that he bought to replace a Cub. My Papaw raised "baccer" (tobacco) and corn with the Super A, but the fondest memory was of the sawmill. He owned a small sawmill for sawing "baccer" sticks. The Super A was the powerplant. When I was old enough (7 or 8), I would get up early and be dressed to
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
