Posted by DR. EVIL on June 03, 2022 at 12:48:12 from (174.192.129.83):
In Reply to: Elevator Question posted by Kerwin on June 03, 2022 at 06:46:26:
The crib on the farm I grew up on had a Kewanee brand inside elevator, the horizontal conveyor was recessed into the concrete floor. Same elevator carried ear corn into the cupola and chutes directed ear corn into the sides of the crib, or into the overhead bins above the driveway. Those bins could have held shell corn, soy beans, but we raised 40 acres of oats every year for straw and to start fresh seeding of alfalfa for hog pasture and 20 acres of hay for the cattle. The crib also had a platform scale in the south half of the driveway, platform was over 20 ft long by 7-8 ft wide. As our wagons got bigger our trust of that scale diminished, I backed our wagons in from the north end of the crib. Bob and Phillis Johnson who wrote The CORN PICKER Book have also written The Corn Crib Book, pretty safe to say somebody spent about an hour in our crib every day year round, from grinding ear corn for the feeder cattle to unloading supplements to add to the grinder so they mixed in with the feed. One thing we learned the hard way, the '51 Farmall M with 4M&W pistons was the grinding tractor, the Super H could pinch hit in an emergency but the Kneodler burr mill was absolutely everything it wanted to pull
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
