Posted by Hobo,NC on February 25, 2022 at 18:43:08 from (75.137.54.152):
I don't want to ware this out this is why we do this.
2007 Nissan Maxima 3.5L V6 oil leak it pays 4.0hr. its a gravy job for us that do this. Yes its aggerating to get all the wire clips off. Nissan is famous for making the wiring harness as short as possible there is no free play to them. At this age rubber parts are brittle and break. We get thru all this and order up the parts it falls back together like clockwork as long as you don't unplug the throttle body and have to reset idle speed etc...
Vehicles are made to assemble not take apart get over take it apart most assemble great.
Lets go get the valve cover gaskets the cowl has to come off I took the pix after I put it back together I am waiting for a new seal for the cowl it was trashed and I am not putting it back on with out a new seal : ) I will add a pix when I get the cowl back on. Its not possible to do the job with the cowl on : (
Apart, I learned the tricks to get it apart with out much disassemble and I charge well for it.
10 years from now when this job is repeated it will be a nightmare every thing he touches will break... Its not as bad as it looks and reminds you why you do it.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
