Posted by Bruce from Can. on February 19, 2022 at 11:35:14 from (70.50.208.37):
In Reply to: technology in dairy posted by Hoofer B on February 19, 2022 at 11:08:34:
I started with surge bucket milker, and a flat top cooler. Now I milk with Boumatic auto-take off units that run on a track line in the barn. I have several neighbours that have the lelly robot milkers, and the cows go to the milkers voluntarily. And one friend milking 170 cows in a 24 cow carousel. Most farmers here store their corn silage and hay silage in bunkers or bags now. Hundreds of tower silos sit empty or have been knocked down. I do 90% of my hay as wet wrapped silage bales. A very popular way of storing hay now. There has been some folks going to grass fed milk production. Grass fed milk sells at a 10cents per litre premium, but the yield drag on production is brutal. You cannot feed corn silage, and are very limited in the amount of grain fed. Cows must graze daily for 120 days. Hard to say how long anyone will stay on this program. My friend with the 24 cow carousel parlour also has a on farm artisan cheese plant. On farm milk processing and direct marketing is a popular trend, time will tell how well it works
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
