Posted by redforlife on January 04, 2022 at 10:15:49 from (174.210.166.138):
In Reply to: tractor tire seating posted by INCase on January 04, 2022 at 09:40:59:
I'm guessing it sat for a LONG time flat. Or, it was moved/driven on while flat. If its beaded on the rest of the rim, you might put that part down and deflate, and re-inflate, and see what happens. This won't work of course, if its not beaded all the way around the rim. If so, you might try the same thing with tractor axle jacked up. If the side wall is all stiff, it might be better to drive it for short while (to limber up the side wall) before trying this. Having low tire pressure would aid in doing that. If just in one spot, driving it around over inflated 10 to 15 lbs might pop it back out. If it does, then just correct the tire pressure. I'm guessing you'll have to do some playing around. Squirting soapy water where it needs to move might also aid in getting it back right.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
