Posted by used red MN on September 30, 2021 at 22:30:50 from (75.73.112.20):
In Reply to: Farmall M posted by 37 chief on September 30, 2021 at 20:32:44:
A 400 was designed to be equipped with a live PTO and, live hydraulics with integral valving and a Torque Amplifier. On the M & MD or the Super models these items were added on to modernize that tractor line. The 400 did have a little bigger engine than the MD 248 vs 264 CID, but was the same as the Super MD. The x00 series introduced the fast hitch on models over 30hp. I can not tell you if there will be damage to the diesel injection pump if it is run for longer periods on gas, I do not think it will. The thing about it is the gasoline start system is only designed to start the engine and warm it up to switch to diesel. The carb and intake system for the gas side is small and really only designed to run the engine at a fast idle and the tractor will only have minimal power on gasoline. I will attach a link to the tractor data page for the 400 so you can see the physical difference between it and your MD.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
