I have done some field mowing for approx. the last 35 years . I did it as a side-line using what equipment I had. With the equipment you already own it sounds like you have plenty of equipment to start with. For the last 25 or so years due to time constraints I basically did the mowing for the same regular customers year after year, all within tractor driving distance as opposed to transporting the tractor to the job. Mostly a couple places with unused horse pastures and small fields. If you get into doing things on a commercial scale you will need insurance to cover this type of operation. I always charged travel time one way and also would advise against taking jobs where you will be trying to cut stuff at the limits of your machinerys limits (tall brush, real wet areas in a wet year etc,). These jobs can become unprofitable real quick. Hourly charge will vary greatly based on such factors as insurance costs,transportation costs etc. which may or may not apply as well as charging more for a real large machine like your 15 footer. I would start out slow and work close to home if possible to keep the overhead down. When I started I would charge $25-30/hr for a tractor with a 5 ft. cutter. Now I figure $60-70/hr for the same size outfit. As others have mentioned there are often people who will work fairly cheap so depending on your area it may be hard to get much work if you have to compete with them , although in my experience they come and go so if you can get some regular repeat customers that is your best bet as opposed for chasing around after work.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Tractor Parade: Story of a Case SC - by Bernie DeLon. On a early fall morning back in 1994, I opened the newspaper and happened to spy an article about a local antique tractor club having their annual show that weekend.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
