Posted by Foolster on September 18, 2021 at 18:56:42 from (75.138.194.165):
I am rebuilding a Massey Ferguson 130 that was a narrow vineyard model. All the tires were cracked beyond use. It has 3x19 tires on the front and 9.5x24 on the back. I am putting 12.4x24 with 10 inch wide rims on the back and thinking about putting 6x16 rims on the front.
As I was looking at tires brands, Harvest King tires seemed to be the most inexpensive. Has anyone had any experience with them? I was going to get a pair of 7.5x16 tri rib tires for the front.
I have learned that I can get worn but still usable front drive tires from large 4x4 tractors for my rear tires that are 8 ply and still have 40% of their tread. Any comments about what I am doing are appreciated. I am spacing the rear tires out by about four inches per side by reversing the centers then gaining another three inches from the wider tires and rims. I want to make the tractor slightly wider for it to be more stable.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
