Posted by Ac145 on July 10, 2021 at 16:18:33 from (71.74.145.59):
Hello to all. New to the fourm. Not new to antique tractors all tractors equipment and things. About 25 years ago dad and I picked up a Massey Harris 44 he used it at the local fair or tractor show pulled it about once a year. First gear down the track pretty much stock. A lot of second and third places with the old 44. Had a problem with the starter turned the motor over then would kick out finally decided it was time to take it to the local old feller and have it reworked. Yes we have converted it over to 12 V and of course ole boy said that Them starters Are not designed for 12 V which is true. The part that broke he replaced on the Bendix Drive and wanted to know if there's a possibility that we had possibly gotten water on top the pistons to create hydraulic lock because that's the only way in his opinion that the sheer pins on the starter or keyway had broke. No water on top the Pistons everything's good because he said pull the plugs roll the motor over just to check which I did. Might as well do a compression test wow wow 175 psi on each cylinder no wonder starter is going bad I'd say this tractor is good
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Implements and Their Use - by Curtis Von Fange. Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he reached his early sixties
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
