Re: Case 930 Engine Knock and Failure

Posted by jon f mn on May 20, 2021 at 11:13:59 from (174.219.7.223):

In Reply to: Case 930 Engine Knock and Failure posted by aaronknodel on May 20, 2021 at 08:33:24:

Sounds like a rod was loose to start. Are you sure the clearance was correct? What was your oil pressure running? Did you use the correct rod cap on the rod? I had two different number 2 rods on one job and they were tight because the cap from one was used on the rod from the other. When together they fit correct but when mixed they were right.

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: (avoid special characters) Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]