Posted by Dave41A on April 30, 2021 at 08:10:23 from (71.161.67.127):
In Reply to: Tiller posted by flying belgian on April 30, 2021 at 07:44:54:
Soil conditions will determine the size you can put on there. I run a 32 inch behind my JD 650, which has even less HP than you do. I used to live in area with rocky, sandy soil. It handled it no problem. Now I live in an area with very heavy clay. The engine has no trouble but the slip clutch will slip & burn if I am not paying attention. Of course, I would rather burn up the clutch than damage the engine.
The 1025 should be able to run a 32 inch without problem. The live PTO & hydro transmission you have will also make life easier for you than for me--you might even be able to go up to 36 or even 40 inch if your soil permits it.
Regarding brands, mine is a Farmer Helper that I bought through Betstco. It works well enough and can be offset to cover the tire track. I got a great late/off-season (Fall) price on it, so grabbed it. I am surprised at how pricey tillers have become. Other brands likely add other features that I don't have--but for more money. I am sure others will chime in with their experiences. Good luck, Dave
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
