Re: hays done

Posted by Walt Davies on June 12, 2007 at 22:35:06 from (70.41.246.125):

In Reply to: hays done posted by thresherman on June 12, 2007 at 19:42:19:

Your're lucky went over to move the tractor and mower to a new field then thought why not make a round to see what I got here and half way around the first field Wham and the whole thing came to a dead stop. Checked it out could move the tractor without killing engine. Ok put the PTO in neutral and tractor moved. Went to look at mower BUMMER Broke the Shaft that holds the belt pulley to the upper part. I know it going to be expensive cause it goes all the way though the rubber roller to the other side to run the metal roller. Well Cest La VIVE!!

Walt

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]