Posted by Nalley on December 17, 2020 at 15:54:16 from (174.202.33.165):
Ive got a 76 4430 I recently bought. I hooked my baler up to it to make sure everything worked. Ive already hooked up my batwing and used it a bit. Hooked up my rake as well. Everything works. Ive got a Deere 458 baler and as you all know on the Deere 4x5s the gate shuts and then the tension arm lowers down to tighten the belts unlike a 4x6. So basically it raises the gate and its strong but when I close it towards the end when its about to close shut it slows down and the tension arm takes 7-8 sometimes 9 seconds to lower down. I reversed the hoses and it does the same thing. Tried remote #2 and it didnt help. Reversed the hoses on that one too. Didnt help. I checked the screw where you change it from single acting cylinder and double acting. It was all the way in when I checked it. Not really sure what to do. Ive been told its the stroke control valve. Im having a hard time believing that but maybe it is. I messaged the previous owner and he said it did the same thing on his 558 so I know its not the baler. Id just like to hear some others talk on this. Thanks
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
