Posted by Shaler on December 07, 2020 at 06:38:46 from (71.112.189.13):
For the past 10-15 years I have had a few hydraulic hoses blow out, needed a few "custom applications" (i.e. extra long hoses for bale thrower on baler), or simply replacement hoses for the hydraulic cylinder bought at the farm sale for $10 with hoses completely shot. Due to apparent ignorance, I have patronized equipment dealers and places like NAPA for my hydraulic hoses. News flash- Getting a hose made up is not cheap! Recently I became aware that pre-made hoses with male only ends in "common" lengths (like 5-6-7 feet) can be purchased at your local chain farm supply store (Rural King, Tractor Supply, so forth). It just never occurred to me to look there. If you need such a hose, these places are about 1/4 to 1/3 the price of a dealer or NAPA. If you need a special end crimped on your hose like a swivel or some such, the farm supply chain store ones wont work. So my post has two purposes: 1) To notify anyone that just needs a standard hose to look at the ones in the farm supply store and save a good chunk of change. The second point is to say these hoses are printed "Made in China" and like I said, are much much cheaper than having one made up (and less time consuming as well). Has anyone found out that these farm supply hoses are of inferior quality and stay clear of them? I just have to question why they are so much lower priced than custom made ones.... and it could certainly be because they are a big money maker for NAPA or the equipment dealer.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
