Posted by Dan in North Houston on December 04, 2020 at 05:08:55 from (216.136.87.146):
In Reply to: Winch posted by drussell on December 04, 2020 at 03:45:22:
As others have said, once you get all the wire line off, you will see that the drum is designed for the line to be wrapped in one direction. On all of the dozer winches I was around, the loose end with the tail-chain and hook should come up over the back and top of the winch, rather than up between the winch and the back of the dozer. Put another way, if you were standing off to the side looking at the winch from the driver's side, the drum should be rotating clockwise to unwind and counter-clockwise when taking in line. Unwinding the line under power or "power out", is a handy feature that lets you unspool line without having to pull it out by hand, and if you move the tractor or dozer forward at the same time you are "powering out", you will end up with the line laid out neatly on the ground. A heavy tail-chain and hook helps when spooling the line, as a little resistance helps the line spool evenly and snug on the drum.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Reflections of the Fifties - by "Country" Elliott. I remember rowing up in the 1950�s in a small, rural town in northwestern New Jersey. The closest town to ours was only 3 miles away, and there were seven dairy farms in the areas of these two country towns. We had 5 acres, and because my Dad was a salesman and not a dairy farmer, he let the Bockovens, who owned the Willow Tree Dairy farm most of our land.
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
