A few errors here. It would be very difficult to get creosote to form INSIDE a boiler unless the temp is running very, very low. The condensation will normally occur at the point up the pipe where the pipe cools below 250 degrees. Smoke does not need to encounter moisture, the moisture is a by product of combustion and is in the flue along with the smoke. Wood boiler and wood stove flue pipes need to be cleaned EVERY DAY. Burning poor grade wood with high moisture content at too low a temperature can result in the flue pipe becoming dangerously coated in just 24 hours. In order to give the pipe its daily cleaning simply stoke it with some hot burning fuel, leave the damper open and let it get up to over 400 degrees for a few minutes. This high heat will cause the days accumulation of creosote to ignite and burn out in a barely noticeable fire, without enough heat outside of the flue to cause any problem. Keep a long handled mirror handy to check your pipe and have a friendly chimney fire every day and stay safe.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
