Posted by Jim.ME on September 05, 2020 at 04:33:18 from (67.242.176.27):
In Reply to: trailer spring posted by 37 chief on September 04, 2020 at 19:39:34:
37 chief,
I wouldn't trust it after straightening it at home. A spring shop knows how to re-arch them properly, and if it is worth it. I doubt that would be cost effective for your trailer spring.
From your posts I believe you haul your tractors on it a lot, I won't take a chance on that spring if I were you. For less than $100 you can replace the spring, u bolts, pins and shackles and know it is right. For a couple hundred or less you can likely do both springs on that axle and all the hardware on both axles. Save the other old spring for a spare. I did a pair of springs with U-bolts for one axle and hardware kits, which included weld on hangers and equalizer rockers, for the three axles on a triaxle gooseneck (7000 pound axles) for about $300 including shipping. JMHO
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Price Enthusiasm? - by Anthony West. Quite frankly, for some time now restorers like myself have become more and more concerned about the rapid increase in the prices of old farm machines here in England. There is now a growing market for "As found" machines. Which as machines get rarer, has found the birth of a new industry....one of the "procurement agent". These agents appropriate as much old machinery as possible then inflate prices at auctions. So at what price enthiusiasm? We are now seeing poor machines which 3 years ago ma
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
