Posted by Doug - Iowa on July 24, 2020 at 07:42:38 from (216.248.81.129):
In Reply to: Helping Neighbors posted by showcrop on July 24, 2020 at 03:51:35:
I believe there is a place for anyone who can show up. We had a guy in an electric wheelchair for years as radio operator, and thankful to have him. Older guys like me drive truck or run pump or direct traffic. And keep our criticism to ourselves; let the younger guys run the dept in the way that works best for them.
Our state fire association has lobbied for more mandatory training hours than a young working man can volunteer for. That has drove many away from volunteering. Yes, training is important to keep you and the public safe. But having 4 hours of training on how to calculate flow rates is a waste of time for a rural department. We don't have the manpower and we don't have the water. Spend that time on something that makes sense for us. Grain rescue for example.
I went to a mandatory training a few years back. The trainer was from Minneapolis Fire I think, and the scenario was a grain elevator fire. He said after you set up 4 pumpers off 8 hydrant lines you locate four 4 man teams with a 500 GPM monitor nozzle one on each corner before beginning your attack. Everyone started laughing, he looked pretty confused. Finally someone said you don't have a clue. Here's our scenario. We just rolled up on this with one truck and five guys and maybe 2500 gallons of water. Mutual Aid is 15 minutes away, that is if their truck started on the first try. Now you tell us what to do. He couldn't deal with that. We do what we can with what we got. And we do a damn good job with it I might add.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
