Posted by mike henry on May 20, 2020 at 19:49:30 from (104.9.177.120):
In Reply to: rrlund posted by Mike(NEOhio) on May 20, 2020 at 14:24:53:
The floodings took place north of midland 2 different damns broke loose. One on a resort lake Wixsom lake was a nice all boat lake and is now a crick. The second damn that let go down river was at the Lake Sanford in the town of Sandford. the town is mid sized pictures show old highway 10 that goes through the town from clare to midland and there are 3 cars on the street and water to the door windows. Midland has flooding in down town area that is prodicted to be 9 ft deep before it peaks. Then the flooding goes farther down stream to the freeland west saginaw area as far as highway 46. I am in Rosebush between Mt Pleasant and Clare. Wife is in Midland hospital after a missed step to have some knee work done. No surgery do to flooding and they are evacuating to nursing care facilities and other local hospitals. But they are not finding enough beds for all patients. Less critical are being sent home. Wife is one to come home. This afternoon got a ramp built and some medical equipment that will make her stay a little better till probable surgery now scheduled next week. May have to get a boat to go get her most roads around the west side of midland are closed.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
