If they are 13.9x24, the rim diameter is 24 inches, tire "SECTION WIDTH", where it bulges out at the bottom will be 13.9 inches, above that bulge it will be around 12-13 inches wide depending on rim width. Your rims are probably 11 or 12 inches wide bead-to-bead, where the tire seats against the rim.
You could probably put an 18.4x24 tire on your rims but they would bulge out from the rim terribly, the tread would be very rounded and the outside edges of the lugs wouldn't touch the ground. If the tires are 16.9x24, the 18.4x24's would probably fit better and work better, your rims would be 14 or 15 inches wide. If we knew what your tractor was, make & model, it would help us recommend what you should do. If by chance your tractor is front wheel assist the tire sizing factors in a certain amount of "Lead or Lag", meaning the front wheels turn faster or slower within a certain amount, and you shouldn't stray from factory available tire sizes.
Anyhow, confirm what sizes of tires your asking about and exactly what you want to do and we can better advise you.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Old Abe is Still Making Hay - by Jeremy Sweeten. Things have changed a bit since my last article. I am now almost finished graduate school at Purdue University. I am still in Agronomy, but specializing in hay and forages. My wife has survived two years of marriage to a part-time farmer. The equipment line up has changed a bit too. The DC has retired to
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
