Re: What is this Hammer-mill and the Other thing?

Posted by DoubleO7 on April 14, 2020 at 05:43:04 from (104.136.208.51):

In Reply to: What is this Hammer-mill and the Other thing? posted by RTR on April 13, 2020 at 21:53:05:

The Y does not look like it has a diverting flap. May have had one and looks like there is a shaft boss/outlet for one.

The Y outlet does not look bag friendly with the flanges.

The feed ramp with holes in it.....appears to share the drum with the the other feed ramp/chute.

But the opening at the perforated ramp looks quite small. Maybe for stalks. That side also appears to have a seperate discharge via the blower under that ramp.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Select Gallery Photo  Attach Serial # List  Return to Post  Upload Photos/Videos Press to select files to upload Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]