Re: 1952 B wheel

Posted by rustred on April 05, 2020 at 16:15:40 from (74.214.153.210):

In Reply to: 1952 B wheel posted by mkIV on April 05, 2020 at 15:36:06:

welcome aboard . for starters what are u torqueing them to? should be in the neighbour hood of 280 ft.you be hard pressed to get them tight with a 1/2 drive, you need 3/4 drive set for that. lbs. but you must see if they are grade 5 or grade 8 bolts. grade 5 will have 3 marks grade 8 will have 5 marks on the head. plus those threads must be thread chased to make sure they are clean so the bolts are not binding. plus make sure you have the correct bolts so they are not bottoming out. plus make sure the splines are good and clean. I would think you are not tightening them enough and that's the problem

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]