Posted by blue924.9 on December 23, 2019 at 08:31:44 from (174.219.29.138):
In Reply to: Pickup dilemma posted by blue924.9 on December 22, 2019 at 14:01:01:
A break down for everybody. Truck is 4wd what ever they call the cab with half sized suicide doors and an slt fairly highly optioned.
The intake gasket is most likely out, i'm running down a smoke machine to confirm but it has been leaking oil for about 20k miles so it's pretty safe to assume. And If it is I will be getting a new intake to eliminate this gasket
The heads have broken manifold bolts and will likely be cracked on removal as the engine has been worked and the temp has creeped into the 230 range a few times in muddy valleys where stopping wasn't an option. So im budgeting new heads
Timing chain will likely be stretched enough to warrant replacement while im that close.
Front main and balancer is leading and oil soaked. Could be a few others I'll look at the list I made
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
