Re: F-12 Farmall on tip toe steel

Posted by MikeH-Tx on January 24, 2002 at 09:16:58 from (144.189.40.222):

In Reply to: F-12 Farmall on tip toe steel posted by TAZ on January 24, 2002 at 07:53:33:

Not so rare.

Most of the F12s are narrow front, but enough wide fronts were made to not be rare either.

Mine came on tiptoe steel too. I converted it back to rubber since I wanted to use the tractor. Riding on steel was an experience I cherish, but don't want to repeat.

34 F12s would either be equiped with the Waukesha engine or the later IHC engine. The IHC version from that year would use a different crank, bearings and rods from those that came later. Might be a problem if you have to replace them. (my 35 has the same).

750 is not bad if it is running well. A little high if not.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: F-12 Farmall on tip toe steel Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]