Re: brought the wrong volt lights

Posted by MikeH-Tx on January 21, 2002 at 10:08:19 from (144.189.40.221):

In Reply to: brought the wrong volt lights posted by allan on January 21, 2002 at 08:59:37:

First thing to do is to take the light bulb down to NAPA or whatever auto parts store you use and see if they can sell you a 12V that will plug into the same socket. If so, you are done.

If not, all other options are poor. If you had to, you could wire the two lights in series and 12V would work just fine. Biggest trouble is that there is usually a ground connection via mounting hardware and you would have to insulate that on one fixture.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: brought the wrong volt lights Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]