Posted by SVcummins on September 05, 2019 at 20:32:52 from (75.174.6.87):
In Reply to: 4050 jd power shift posted by hal roberts on September 05, 2019 at 17:08:32:
I don�t know about eleven to 12 on the 15 speed it�s been a long time since I�ve been in one but on the 8 speeds 7 to 8 hesitates and so does 3 to four if your under a full load it�s in those certain gears it dropping a bunch of clutches and brakes in the planateries that�s why they hesitate and they�ll jerk if you got the shift valve set for fast shifts . On the 16 speed funk In the 8000 series 3 to 4 or 4 to 5 can�t remember which will kill the motor on a good hard pull with a 9 shank v ripper that�s has dropped through the hard pan and then twelve to 13 was a hard shift those tractors were using cheap oil my cousin has one he only uses hy gard and it shift smooth as silk in all gears . the operators manual says you need to have the dealer recalibrate the transmission for shifting when other oils than hy gard is used but who reads the book 🤷♀️.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Farmall Story - by Ed Meadors. The year was 1978. Our young family had recently moved to rural Chesapeake, Virginia to a plot of land which would finally allow us to realize our dreams of a huge garden, critters and more lawn and pasture than we would ever use! We needed a TRACTOR; not a riding mower or tractor wannabe, but a real TRACTOR. The answer to our needs materialized in the form of a '44 Farmall A, complete with cultivators, discs, single plow, a 5ft.Woods belly mower and one, mounted spare 9.00x24 rear wheel.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
