Posted by MarkB_MI on July 30, 2019 at 03:51:36 from (174.230.19.24):
In Reply to: Voltage too high posted by Tree-Farmer on July 29, 2019 at 21:14:29:
With the regulator disconnected, the stator output voltage will be dependent on engine speed. It's not possible for the voltage to be too high; that's what the regulator is for.
Something to check for is that the regulator case is grounded. A neighbor's ZTR quit charging, and after checking the stator voltage I told him to replace the regulator. That made no change to the battery voltage, so I checked the regulator output and discovered it wasn't grounded. He added a ground wire from one of the regulator ground screws to a good ground and it has worked fine for over a year. The shroud on that engine was plastic and didn't provide a ground. I have no idea how it was originally grounded as there was no sign of a ground lead anywhere.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Stories From Old Farmer - by K. Pratt. Old Farmer, a.k.a. Dale Jensen began posting messages to our discussion forums at the grand age of 75. With extensive knowledge of farming and tractors, he valued the past and the ways that went with it. He shared these values with us until shortly before his passing. I spoke with Dale in his last days and requested his permission to share some of his stories with the readers of our magazine. He agreed, and provided the
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
