Tractor Talk Discussion Board |
Re: Re: Re: Re: converting 8n from 6 volts to 12 volts
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Bakers Dozen on December 07, 1998 at 20:10:19:
In Reply to: Re: Re: Re: converting 8n from 6 volts to 12 volts posted by Why change to 12v? If it can't start up on six volts your tractor and or parts need help!!! on December 07, 1998 at 19:41:32:
: : : : : I am trying to convert my 8n to 12 volts. I have found a 12 volt alt. from a Gm. The mounting bracket from an old buick v-8 Fit with a few modafications. My problem is the pulley on the GM. alt. is smaller in width than the pulley on the stock generator. Will this cause a proble with the belt ? Do I need to change the pulley or do I use a different belt? Any help here would be wonderfull. Thank you in advance Jim aka Wilseya. : : : : You can e mail me at lybarger@thegrid.net : : : : Thanks again and Wilseya : : : 12 volt is an easy way out of making a wore out tractor start. An alternator makes a tractor look crappy. 12 volt takes out starter drives and ring gears. So, if you want to spend a lot of money in the long run, go right ahead and screw it up with 12 volt. One would think you work in a six volt battery factory.
Follow Ups:
Post a Followup
|