Re: Trying to get a carb to work on my 49 B.

Posted by Alberta Mike on December 07, 2001 at 20:07:11 from (209.47.89.133):

In Reply to: Trying to get a carb to work on my 49 B. posted by Fred A Bown on December 06, 2001 at 19:20:52:

When you say that you ran a drill bit down every hole, does that mean that you drilled out the brass jets themselves? Even if you think you have the right size, just a shade too big and the whole balance of the carb circuit is fried ... generally that procedure is not recommended. Just one possibility if that's what you did. Good luck.

Follow Ups:

• Re: Re: Trying to get a carb to work on my 49 B. Fred A Bown 20:22:48 12/07/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Trying to get a carb to work on my 49 B. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]