|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Did JD ever put a powershift in their 6030 model??????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JD70Jim on November 28, 2001 at 07:28:22 from (64.197.39.219):
In Reply to: Re: Re: Re: Did JD ever put a powershift in their 6030 model?????? posted by Wow !!! on November 27, 2001 at 17:10:24:
Go dig out your copy of GREEN for January, 1996!
Read the JR Hobbes Article on the 6030. He mentions "testing" a NEW 6030 and an 8430 together , in 1977?, with the same load---a nine shank V-ripper. According to the printed article the 6030 would pull in SIXTH GEAR the same load that the 8430 could pull in B2. The difference in speed was that the 6030 would pull it TWICE AS FAST! It was a fine article and had a great deal of good information about the 6030! The thought of one with a soundguard cab and powershift is interesting. If Deere had offered one, they would have never needed the 4840 and the whole line of developement of "high horsepower tractors" would have been different.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tuning-Up Your Tractor: Secondary Ignition Wires and Distributor - by Curtis Von Fange. In our last episode we spent the entire day checking out the spark plugs. Is that efficency? Actually, it took more time to explain than it really did to do the inspection. At any rate we decided that a compression test was in order so we could verify the internal engine status. That way we wouldn't buy any tune up parts until we were sure that the engine was in reasonable mechanical condition. Our tests showed a fictional compression reading of 85, 80, 82 and 86 psi. That is well within a
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
