Re: Making a Grader out of an old tractor

Posted by Curt K. on November 02, 2001 at 19:01:08 from (65.103.2.168):

In Reply to: Making a Grader out of an old tractor posted by Canadian Cowboy on November 01, 2001 at 19:10:49:

I have used the AC model grader, it is built on a stretched version of the model "C". The steering shaft is lengthened also. The turn table style blade is mounted to a ball hitch on brackets behind the front wheel. There are channels extending to the rear with hydraulic cylinders on either side for the lift. It was made for light duty county road maintenance. It works well getting the ruts out of the driveway in summer. It spins out much too easily for use in snow. I'm in Minnesota.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Making a Grader out of an old tractor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]