Posted by johnlobb on April 15, 2019 at 14:58:12 from (72.168.128.99):
In Reply to: Best chainsaw? posted by rrman61 on April 15, 2019 at 07:49:52:
Boy! A lotta comments! The finest piece of equipment I have ever owned is my Dolmar 510 (50cc, 18" bar)(Dolmar is owned by Makita, made in Germany) They are now all branded Makita. Dolmar invented the chain saw and are made down the road from Stihl. Stihl is great at marketing, Dolmar is great at engineering. It also depends if you have a dealer around you that will work on the saw themselves, not send it out. My neighbor bought a Husqvarna from the big box store near us and had a running 2 year battle on fixing this saw. First they said he put straight gas in it, (he didn't) and other non fixing situations. He let it sit for a coupla years, then got tired of looking at it and started pulling it apart. didn't take him very long to find a plug wire almost loose from the coil that none of the brilliant mechanics had caught. After he fixed that, it ran well. DON'T BUY FROM A BIG BOX OR HARDWARE STORE WITHOUT THEIR OWN MECHANIC!!! I also have a small Echo top handle saw which I use now 70% of the time.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Revival of a John Deere Combine - by The Red, John Fritz. For several years I had been driving by a farm house on the west side of Indianapolis that had a John Deere combine parked in high weeds in a lot behind the house. The gentleman no longer farmed because the entire area was developed with housing and light industry. I had stopped several times and knocked on the door but no one would answer. My curiosity was up and I wanted to contact the owner. I wanted to see what he planned to do with the combine.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
