Re: Speaking of cotter pins, I've got a question ????

Posted by John Ne. on October 21, 2001 at 08:20:08 from (209.74.225.153):

In Reply to: Speaking of cotter pins, I've got a question ???? posted by Alberta Mike on October 20, 2001 at 09:43:17:

Mike, in an engine, make sure they won't contact anything, and outside an engine, makesure they won't contact skin, clothes, ropes, wires, etc. Seem some nasty cuts by poorly installed cotter pins, just common sense of what is safest, and easiest to remove and install. Seen a few with the short leg left protruding like a small knife blade, proper in some places, but not in the dark undercarriage of a truck steering/suspension, it gets bent over and tapped down so the next guy doesn't have a few stitches, like a friend did. Just my 35 years experience. john in Nebr.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Speaking of cotter pins, I've got a question ???? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]