Re: Re: Magneto won't ground out - A QUESTION ???

Posted by Alberta Mike on October 02, 2001 at 05:58:53 from (209.47.89.118):

In Reply to: Re: Magneto won't ground out - A QUESTION ??? posted by J.L. on October 01, 2001 at 23:56:47:

Thanks for the help. I don't see any obvious place where the strap might have been attatched. There are permanent rivet heads in the vicinity and also special mounting screws with ratchet type heads that are not meant to be removed (I've seen those on bathroom partition mounts but never anywhere else). Anyways, would I be able to connect to either of the two screws that hold the point assembly down to the base of the mag? And one other question, why is there a ground strap and not simply a wire? Could I use a wire when I get this straightened out or should I pick up a strap at a mag shop (or even make one)?

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Magneto won't ground out - A QUESTION ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]