Re: Re: Removing and Installing Rear Tractor Rubber - How's it done ???

Posted by Jim on September 21, 2001 at 19:22:53 from (12.34.44.37):

In Reply to: Re: Removing and Installing Rear Tractor Rubber - How's it done ??? posted by KWB on September 21, 2001 at 18:58:56:

Let the air out of the tire,Jack up the tractor, block it so it doesnt fall, Get a good flat iron , (I use a old grub hoe with a short handle)and put it in the bead, whack it a few times with a big hammer till the bead "breaks" careful you dont cut the bead,get the bead broke on the outside and the inside(inside is the hardest) after its broke start pryin the bead over the rim, do the outside then the inside, when you get it started you can use a hammer to keep it coming off, just hit the bead as it is coming off the rim,, Good Luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Removing and Installing Rear Tractor Rubber - How's it done ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]