slipping clutches

Posted by skip on September 05, 2001 at 16:38:37 from (205.188.198.53):

I NEED SOME HELP WITH A 1959 JD 440 TRACTOR WITH A 2 CYL. GM DETROIT. I JUST HAD THE RIGHT SIDE FINAL DRIVE REBUILT. WHEN I REASSEMBLED THE DRIVE, THERE WAS NO POWER TO THE RIGHT TRACK. THE DRIVE PINION AND FIBRE DISCS WERE TURNING BUT THE FRICTION PLATE WAS SLIPPING. I DISASSEMBLED THE DRIVE AGAIN AND ADJUSTED THE CLUTCHES ALL THE WAY AND REASSEMBLED. THIS HELPED A LITTLE BIT BUT THE SAME THING OCCURED. IS THERE A TOOL THAT CAN BE USED TO GAUGE THE THICKNESS OF THE FIBRE DISCS OR THE THICKNESS OF THE CLUTCH SO THE FINAL DRIVE DOESN'T NEED TO BE TAKEN ON OR OFF SO MANY TIMES? ANY HELP WOULD SURE BE APPRECIATED.

Follow Ups:

• Re: slipping clutches Skip Boudreaux 09:17:26 09/06/01 (1)
  • Re: Re: slipping clutches paul 10:20:47 09/06/01 (0)

Post A Followup Name: E-Mail: Subject: Re: slipping clutches Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]