|
Tractor Talk Discussion Board |
Re: Trailering -- the basics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bama Red on August 30, 2001 at 07:37:10 from (206.166.230.5):
In Reply to: Trailering -- the basics posted by Darryl on August 29, 2001 at 12:11:49:
I'm Safety Director for a large public utility in Alabama and we haul a lot of backhoes, tractors, etc. There has been a lot of good advice in the other posts, so let me just addd my 2 cents: 1. Always use chains, make sure they and the binders are rated for the load your are carrying. 2. Use the ratchet binders (also called screw binders), not the over center binders - they're much safer. 3. Layout your chains in an "X" pattern - LF tire chained to right rear of trailer, RF tire to left rear of trailer, etc. 4. Back onto the trailer - gives you better adjustability of your load. 5. Make sure your trailer is on firm, level ground before attempting to load. Just because the ground will support the trailer, doesn't mean it will support the tractor and trailer. Having one side of the trailer sink into the ground can ruin your whole day if your tractor (and you) fall off as you'reloading. 6. If you have any doubts about conditions, brakes or your ability to do the job - DON'T DO IT! A little long, but I hope it helps.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|