Hi we make anywhere from 1200-2000 small squares a year for our own use. Larger than 50 pounds though. We pull a wagon behind our baler. We also have 3 good size flat wagons smallest one holds 85 bales. Dad is 76 so he drives, and my brother and I stack on the wagon and unload in the barn. We bale at night and on the weekends because of our full time jobs. We too tried to hire kids, and a couple of guys that were out of work. We were willing to pay 12-15 dollars per hour. Nobody was interested. The extra help would have been nice so we could get more done faster when the weather was good. Seems like with investing in a bunch of equipment there would have to be a long term to make it profitable. For us we do what we can in small bales and do the rest in large rounds if we can't get to it quick enough. I know this doesn't really answer your question, but we are kinda in the same situation with not being able to find help willing to work. I guess some of the people without jobs don't have a job for a reason !
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.