Steering Problem

Posted by David Hajduk on August 15, 2001 at 08:03:56 from (209.96.217.3):

Does anyone know how to limit the turning radius of a tractor's steering?

The tractor I own uses a worm gear and (I think) sector gear. There is no internal stop in the steering box. The sector gear goes too far when turning right and then binds at the bottom of the worm gear. This puts extreme stress on the steering shaft which I have snapped at the weld couping the worm gear to the shaft.

I need to limit the travel of the sector gear so it does not go to the bottom of the worm gear and bind. One way would be to limit the steering linkage or components in a way that would restrict how much I can turn the tires therefore keeping the sector gear a save distance from the binding point.

In case it matters, the tractor is a Belarus 250A.

Any suggestions would be appreciated. Thank you.

Follow Ups:

• Re: Steering Problem greg 18:20:21 08/16/01 (0)
• Re: Steering Problem Robert in W. Mi. 18:36:16 08/15/01 (2)
  • Re: Re: Steering Problem Dave Hajduk 19:02:27 08/15/01 (1)
    • Re: Re: Re: Steering Problem Robert in W. Michigan 04:39:57 08/16/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Steering Problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]