Posted by oldtanker on January 01, 2019 at 08:28:25 from (66.228.255.59):
In Reply to: On Topic! posted by larry@stinescorner on January 01, 2019 at 06:08:06:
Quoting Removed, click Modern View to see
I wonder why they did that??? If you get into WWII history most of the Italian military hardware was considered to be pretty poor and most far outdated when the war started. They didn't really have the ability to improve very much as the war progressed. So I'm guessing if they used surplus Italian military engines they were not surplus from WWII. After the war all military equipment/hardware became the property of the allies. So most of the captured equipment was sold for scrap to help pay for the cost of the war. So I'm betting those engines were from equipment designed and built after the war was over?
Our own military did that for years. Used purpose designed engines and when a piece of equipment was updated sold off those engines in the supply system. Consequently those engines were not used in civilian applications so there were no parts available one they did wind up in other hands.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
