Posted by Adirondack case guy on December 30, 2018 at 16:15:49 from (69.207.198.19):
I went up to the farm on Saturday morning, and my cousin and I hooked up the 3394 to the batwing to shred corn stalks. I spent about 5 hrs. yesterday and 4 today, to cover about 80A of combined corn. Had a minor problem with one of the slip clutches on the center drive this morning, but just needed a good tightening to solve that. It is good to be back behind the wheel and doing field work. Tomorrow, I plan to fire up my Case 931 and get back at plowing those fields down. Supposed to be in 40's next 2 days. Early snow on 8th of Nov. which didn't melt, until last few days kept frost from penetrating into the ground. Stay tuned for more pictures of plowing tomorrow. Loren
Pics., from yesterday, and yes, some wet spots.
Temp dropped to 21F and we got overnight snow. Pic of 3394 this morning.
Pic this morning on 30A field down below the farm. Loren
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Lead Substitutes - by Mike Schordine. Lead was oriinally added to gasoline as an upper cylinder lubricant. It lubes the valves and seats. If you rebuild the motor, you could use hardened seats and valves, and unleaded fuel. But if your old tractor runs good, a simple lead substitute added to the gas is a perfectly reasonable solution. And, if you are like me, your tractor is under cover, but it sits outside. So with every temperature change, the humidity in the air collects in the fuel tank, in the form of water.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
