|
Tractor Talk Discussion Board |
Re: Trenching attachment for Tractors - Do they exist?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on August 06, 2001 at 12:25:33 from (199.3.9.7):
In Reply to: Trenching attachment for Tractors - Do they exist? posted by Jim on August 06, 2001 at 07:45:38:
Yes. However: 1.Expensive. Or if cheap, too wore out to do anything productive. 2. 3-points don't offer downforce, so they are cumbersome to mount, need to strap onto the frame somehow. 3. Most older tractors do not have a slow enough low gear, as trenching is a very slow creep forward, at least if you want to get below the frost line 'here'. Only really works well with a hydro tranny tractor, or you will be hard on your cluch as you slip it all the time. 4. You might find exeptions to what I've said, as I don't know all that much. --->Paul
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|