SMTA Loose Foot Clutch Pedal

Posted by GooseCreek on August 02, 2001 at 11:19:02 from (198.111.150.155):

The foot clutch pedal on my SMTA is loose on the shaft. I took it off with the intention of drilling it out and installing a bushing. However I discovered that most of the wear was on the shaft itself. Now I am also thinking about removing the shaft and have it welded and ground back to it's original dia. My question is can I simply pull out the clutch/brake pedal shaft from the housing? Does it simply go through the transmission housing with no internal connections? Would appriciate your thoughts on this problem. Also if there is a simpler fix I would appreciate hearing from you.

Follow Ups:

• Re: SMTA Loose Foot Clutch Pedal The Red 11:22:03 08/02/01 (0)

Post A Followup Name: E-Mail: Subject: Re: SMTA Loose Foot Clutch Pedal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]