I have never seen 15.5 tires on a tractor that size. We have 18.4 tires on our 1650 and 1750. Pull a 16 inch Ford plow with plenty of room left in the furrow. I have to agree with Loren on this one. Hook it up and see what it does. Make sure your plow is set up right. Plow will not be set up right for the 1850 if it is set up for the 730 right now. If I was you I would keep the 730/plow setup you have and buy a mounted or semi mounted plow for the 1850. In our heavy ground an 1850 would be a 4 or 5 bottom 16" plow depending on how fast you wanted to go. Farm next door always plowed with a Massey 1100(same engine you have) and a 5 bottom 16" fully mounted plow. He did ok but sometimes had to really gear down. Too much plow for the tractor. I guess it really depends on your budget and what your looking to accomplish.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Removin Broken Bolts - by Staff. Another great discussion from the Tool Talk Discussion Forum. The discussion started out with the following post: " How would I remove a bolt thats broken off in a piece of metal and I want to save the treads in the metal and then put in a new bolt. "
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
